COVID-19 summary dashboard
Updated Monday, Wednesday, and Friday
Due to routine systems maintenance, data will not be updated on Friday May 20.
Updates will resume on Monday, May 23.
Data are updated Monday, Wednesday, and Friday, and reflect laboratory results reported to the Washington State Department of Health as of midnight the day before. Data for previous dates will be updated as new results are entered, interviews are conducted, and data errors are corrected.
Many people test positive but do not require hospitalization. The counts of positive cases do not necessarily indicate levels of demand at local hospitals.
Reporting of test results to the Washington State Department of Health may be delayed by several days and will be updated when data are available. Only positive or negative test results are reflected in the counts and exclude tests where results are pending, inconclusive or were not performed.
The dashboard below has three selectable tabs – which display the default Overview data about the outbreak, Demographics, and Geography.
Use the "hover" function to see more info on the dashboard. If your mouse or finger hovers over the data, a window will show additional explanation and detail.
To ensure you are viewing the latest version posted to this site, press Refresh or Reload on your browser menu.
By default, the daily dashboard shows data for all of King County. You can change this by using the "Select a location" drop down menu and radio buttons. The entire dashboard can be updated to show numbers for a specific city, health reporting area, or region. Health reporting areas are neighborhoods that closely align with city boundaries and are used to aid in considering issues related to health status or health policies. Regions are groups of HRAs into larger geographic areas within King County.
On the overview page of the dashboard, click the “Show data as a table” button to see additional data on cases, hospitalizations, deaths, or PCR testing as a table rather than as a graph. These tables also provide additional information, such as the number of confirmed and probable cases in the past 7 days, that aren’t presented in the charts.
Every day, King County receives new reports of cases, hospitalizations, deaths, and test results. Due to reporting delays, manual reporting, and data quality changes, these reports are not all necessarily from the previous day and may be from several months in the past.
The "daily average" numbers indicate the average number of new cases, hospitalizations, deaths, or PCR tests that were reported over the previous 7 days.
Yes! There are a few options.
- On the main Overview, if you hover over the "daily average" you can see the averages for the past 7 days.
- On the "Demographics" tab, you can change the "Daily Average" chart to show a custom period of time rather than the entire time period covered by the dashboard. Use the slider under the chart to select the start and end date for the period that you want to see.
- On the "Demographics" tab, on the bottom half of the page, you cal also select "Last 30 days" with the button on the left side.
- On the "Geography" tab, at the top of the page, you can use the slider to choose different two-week periods.
You can use the various toggles on the "Demographics" page to change the metric, geographic location, and time period shown on the chart.
- Use the "Select a metric" toggle to switch between cases, hospitalizations, deaths, and testing information.
- Use the "Select a location" toggle and radio buttons to select a specific city, health reporting area, or region.
- Use the radio buttons above the demographics chart to switch between "Overall" and "Past 30 days"
In order to protect privacy of individual King County residents, data for the Last 30 days is only available for all King County. When counts for one demographic group are less than 10, or the counts for all but one demographic subgroup is less than 10, data are suppressed. Data are adjusted and corrected daily.
The “Geography” and “Geography over time” tabs have been combined into the new “Geography” tab. The slider at the top of the page can be used to switch between two-week periods. Move the slider all the way to the right to see a map that shows overall rates (from January 1, 2020 to the present).
The following are in Microsoft Excel format. Be sure to press refresh or reload on your web browser to ensure you're accessing the latest versions:
- Overall counts and rates by geographic levels
- Biweekly counts and rates by geographic levels
- Daily counts and rates for all King County
- Daily counts by city
- Daily counts by ZIP
- Overall counts by city and demographic characteristics
- Weekly counts for all King County by demographic characteristics
Questions based from the Public Health Insider blog (June 23, 2020): Seven questions people ask about our daily COVID-19 data dashboard
These are some common questions people ask about the daily outbreak summary, with answers from our lead epidemiologists:
Investigations into COVID-19 cases and deaths are ongoing. And Public Health's epidemiologists are continually improving the accuracy of the data we receive from multiple sources. Every time we find a test result that had inaccurate data about an individual, we correct the data, and that leads to adjustments on the data dashboard.
In addition, some information takes longer for labs and hospitals to collect and send to Public Health.
For example, hospitalizations and deaths may not be reported immediately. If someone dies today, the COVID-19 test may happen after the death, and then another day or two would pass before the test result is available from the lab. In contrast, someone else may die today, but that person was tested a week before dying. Because they already tested positive, that death would get recorded immediately as a COVID-19 death. Both individuals died the same day, but they are added to the dashboard on different days, when the information becomes available to Public Health.
Hospitalizations related to COVID-19 may require four to five days to confirm. The process involves a case investigator interviewing a person who tested positive for COVID-19. The investigator learns that they had been hospitalized, and then the case is matched to hospital data. Sometimes, a person who tests positive was in the hospital data – but it turns out the reason for hospitalization was unrelated to COVID-19 (such as a car crash). This process of matching and correcting might take four or five days after the positive test was first reported on the dashboard.
Test results begin with samples taken at many different testing locations (health care providers), and then sent to many different laboratories. Each location collects the data differently, and it's common for a test result to have incomplete information. If you've ever skipped a question or left a field blank, you understand how this can happen.
More than a dozen different labs send results to the Washington state Department of Health, which merges them together. When Public Health receives the data for King County residents, the epidemiologists then cross-reference the results with data from hospitals, geographic systems, and other databases that can help fill in missing data. During this process, over the course of a few days, individual errors are corrected and gaps are filled.
A wrong address is one of the most common errors:
- If a person's address field was left blank, the laboratory will insert the location where the test happened.
- If an address is along the border of two cities or counties, it might initially get miscategorized.
- If a person is living in a long-term temporary location, such as a nursing home, the form might still have their previous permanent residence. But it's important to record illnesses acquired in long-term care facilities.
As the case investigation leads to more accurate information, we update the original data. When this happens, a positive case or a death might be correctly moved from one city to another, and the date might change.
Typically, about 60% of all lab results are missing race/ethnicity. This is one of most common fields left blank on the original form collected at testing sites.
For people who test positive, a health department case investigator will reach out to the individual to interview them. During the interview, they will ask about race/ethnicity. Some people decline to answer. After the interviews, about 20% of positive cases are still missing race/ethnicity. When there are high rates of missing data, then calculations based on the remaining information are less precise.
Other uncertainties come from people who are of mixed race. They may choose to answer the question in many different ways.
These are three common reasons:
- No street address: Some King County residents don't have a street address. For example, they might be homeless, or they might use a Post Office Box as their address. They will be included in King County totals, but not in any city. To make things more complicated, people with a P.O. Box are included in zip code data, but they can't reliably be added to a specific city without having a precise street address.
- Unincorporated neighborhoods: Many people live in unincorporated areas, and the county total includes all of the cities plus unincorporated areas.
- Subtractions: Sometimes, the new data reflect corrections – which can include subtractions. If a case gets removed from a category (such as deaths or hospitalizations), or assigned to a corrected address, numbers in one city may decline compared to previously published numbers. Some cities even cross over into neighboring counties, so a small correction to an address can move someone in, say, Bothell from King to Snohomish County.
Our summary dashboard is updated with data as soon as it becomes available, and there could be errors on any given day, as Public Health receives data that is incomplete or not yet fully investigated. Please be aware improvements may look like mistakes – such as address corrections, or updated info about hospitalizations or deaths. Sometimes, there may be differences in an underlying data source that is not publicly available that may cause differences in calculations on any given date.
When comparing one table or map to another, beware that the rates may be presented with different denominators in different tabs. And it's always worth clicking “refresh” on your web browser to make sure you are seeing the most current information.
Each dashboard is on a different update schedule – which is now noted near the top of each screen. They are all compiled and checked manually, to catch many of the errors that would be included if they were automated.
View the dashboard on a web-enabled mobile device (phones and tablets)
Select the down-arrow icon at the bottom-right of the dashboard for other formats
Use the tabs along the top to navigate the dashboard. Hover your cursor over the dashboard to view details about the data.